FTTH SM Splice On SC/APC Fiber Optic Fast Connector
Connecting SC connector to extend the length of a cable run.
APPLICATIONS
- Asynchronous Transmission Mode(ATM);
- Passive Optical Networks (PON) Fast Connector;
- Fiber to the Building (FTTB);
- FIber To The Office (FTTO);
- Fiber to The Home (FTTH);
- Local Area Networks (LAN);
- Cable Television (CATV);
- Test Equipment.
FEATURE
- No special assembly tool, Fast and easy installation;
- Can be reconnected in the field;
- Compatible with both 3mm drop cable and 3x2mm flat cable;
- Field-termination connector with no epoxy or polishing required;
- No matching gel enables low reflection and high reliability;
- Splicing point is inside of the connector. No additional splicing work required;
- The fusion splice position can be protected by the heat shrinkable tube inside, not easy broken;
- 100% qualified, prolong use life, reduce the Maintenance cost.
You are browsing HOLIGHT’s official website, feel free to cantcat us, please click the icon below!
DESCRIPTION
FTTH Singlemode & Multimode Splice On SC/APC Fiber Optic Fast Connector Hot Melting Type
FTTH Single Mode Splice On SC/APC Fast Connector Compared with the mechanical optical fast connector, this new practical connector saves the maintenance work of the V-groove mechanical connector, can increase the service life of the solder joint of the connector, and reduce the maintenance cost. Factory pre-polished ferrules eliminate the need for field polishing, adhesives, and crimps, minimizing operator error and the potential for costly connector scrap.
| Fiber Mode | SM/MM |
| Suitable Cable OD | 0.9mm, 2.0mm, 3.0mm |
| Optical Fiber Diameter | 125μm |
| Tight Buffer Diameter (μm) | 900μm |
| Operation Time | About 120s (no fiber cut) |
| Insertion Loss (dB) | UPC≤0.2dB; APC≤0.3dB (1310nm & 1550nm) |
| Return Loss( dB) | SM UPC≥45dB; APC≥55dB; MM UPC≥35dB |
| Operating Temperature | -40°C~+75°C |
| Storage Temperature | -40°C~+85°C |
| Remark | Ferrule Concentricity SM< 1um Ferrule inner diameter tolerance +1/-0um Ferrule outer diameter tolerance +/-0.5 um |
Quality Certification
Quality and standards are the foundation of HOLIGHT. We are dedicated to providing customers with the outstanding, standards-compliant products and services.
HOLIGHT has passed many quality system verification, like CE, RoHS, established an internationally standardized quality assurance system and strictly implemented standardized management and control in the course of design, development, production, installation and service.
Please Note: Each fiber adapter is 100% optically inspected and tested for insertion loss before you receive it.
Our Test Assured Program
Take a look at our fiber patch cable test program and see what truly sets us apart
